Some products sold on this website may expose you to chemicals known to the State of
California to cause cancer, birth defects, or other reproductive harm, including
wood dust, formaldehyde, and certain lacquers or finishes.
Always follow the included assembly instructions. Ensure all bolts and fittings are
fully tightened before use. Do not exceed the stated maximum weight capacity.
Keep children away during assembly. Inspect hardware periodically and re-tighten as needed.
ℹ️
Material & Finish Notice
Wood tones and fabric colors may vary slightly from images due to natural material
variation and screen calibration. Surface finishes may require periodic maintenance
to preserve appearance and longevity.
Made with care
Great value
Elegant design
Quality materials
Description
Cre-Away Is A Four Component Powder That Safely And Effectively Modifies Glazed Or Third-Degree Creosote So That It Can Be More Easily Removed By Chimney Sweeping. First, A Reactive Agent Neutralizes The Slightly Acidic Creosote Making It Less Corrosive To Metal Components And Less Flammable. Second, A Dehydrator Absorbs The Oils And Moisture Contained In Some Forms Of Creosote. Third, A Combustion Inhibitor Helps Reduce The Chance Of Chimney Fires. Finally, A Magnesium Catalyst Helps Break Down Third Degree Creosote When The Flue Is Heated By Normal Use. The Catalyst In Cre-Away Turns Creosote Into A Char That Can Be More Easily Removed. Cre-Away Works Best When The Flue Gases Are Heated To About 600F (Surface Stove Pipe Temperature About 300F). Apply Cre-Away Directly To The Flue (Not Into The Fire) Using The 1 Lb. Applicator Bottle. Cre-Away Can Be Used To Modify Third-Degree Creosote By Converting It Into A More Brittle State That Has A Different Expansion/Contraction Rate Than The Flue It Is Attached To. During Heating And Cooling Cycles, The Treated Creosote Loses Its Adhesive Properties So It Can Be More Easily Removed. Creosote And Soot Build-Up In Fireplaces Or Wood Stove Chimneys Can Be A Fire Hazard If It Is Not Properly Cleaned And Maintained. All Chimneys Should Be Inspected And/Or Cleaned Annually By A Qualified Chimney Sweep. Not Recommended For Use With Wood Stoves Having Catalytic Combustors Unless Put In Bypass Mode. If Bypass Mode Is Not Available, Use Acs Anti-Creo-Soot Liquid To Treat Creosote Buildup. Apply During The Heating Season To Modify Glazed Creosote, Making It Easier To Remove. Apply Cre-Away After Every Cleaning To Make Any Remaining Stubborn Deposits Safer And To Neutralize The Acidity And Odors From The Creosote.
⚠️ California Proposition 65 Warning: Some products sold on this website may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visitwww.P65Warnings.ca.gov.